One very damaging side of the thunderstorm is the heavy and serious hail. And how to spot hail damage on your home? When it comes to the roof, sometimes it pays to even get a new one, but it also depends on many factors – the degree of damage, the age of the roof, the availability and cost of the replacement part, etc. Of course, there are more things you should know, so read on.

Is there really any way to spot hail damage on your home

Can you really spot hail damage on your home? Well, it depends. Let’s start with the basics. Hail is created when the rainfall freezes and then magnifies. There are some reports of a hail of incredible size and weight. The piece of ice that allegedly fell in Germany in 1925 was estimated to weigh over four pounds! The piece recorded in the state of Kansas in 1970, is one of the largest pieces ever to fall in its state. This bunch of ice has a maximum circumference and weighed 14 pounds. The piece was too large, even large enough to kill a human!

Fortunately, the hail is usually much smaller and can rather cause discomfort than death. Also, because of the same nature of the thunderstorm with which the hail is located, the areas where the hail caused larger-scale damage are relatively small. However, estimates of the city’s worldwide agricultural crop losses annually are hundreds of millions of dollars. As we said, it’s best to contact the professional Dallas gutter and repair, that can spot hail damage on your home.

Is there effective protection against the hail

Depending on what you need to protect, there are some ways to lower the hail damage in advance. For example, if you need to protect your garden, the best protection against the hail is to install guard nets. They represent a costly but profitable investment. These nets can lasts from 10 to 12 years, with supporting structures for more than 20 years, so that the annual depreciation is bearable and cost-effective for the manufacturer.

Of course, in order to minimize the economic damage of the hail, you can check for insurance at the insurance company. Insurance is especially a good solution for cars and houses, as well as in areas or localities in the Dallas region where the frequency of occurrence of the hail is higher.

What to do if you spot hail damage on your home

This year we are witnessing numerous storms with heavy rain and hail. The unexpected ice from the sky is never good news. And after the clouds have cleared, there are numerous craters on your gutter and roof, larger or smaller, depending on the size of the hail and the thickness and quality of your roof. Well, simply call our Dallas roof repair service – we will inspect your roof for free and then see what we can do to fix any damage made by bad weather. We will take care of it!

Can these damages be repaired at all so that your home looks as same as before? They can and should be done as soon as possible if the damage is more serious, as corrosion will quickly occur at that location.

Although at first glance, ice damage seems cataclysmic, there are various methods of repair, and even the cost of restoring it to its original state does not have to be high. The best is to call reliable roofing services and repairs and leave it all to the professionals.

Methods of repair

There are several ways to bring your roof or gutter to its original state. Some of them require painting, others do not, but the most important are the following factors:

• place of damage
• severity of damage
• a professional inspection and the method for repair
• level of expertise

Bending

This type of bending looks more like a massaging the roof or gutter material. It is a state-of-the-art method with many benefits. The tools used can reach even the most hidden places. Re-painting is usually not required unless it is more severe damage. Unfortunately, this method is not cheap, as it requires a lot of time, trained craftsmen and a special tools.

Gluing

This method is usually applied in places where access from the inside is not possible. Non-damaging glue is used. The so-called plug is glued to the center of the crater and then strongly pulled out (with a special tool). Depending on the type of damage, additional intervention may sometimes be required.

Electrode bending

The essence is almost the same as for gluing, except that there is no glue but a special electrode. This electrode is welded to the sheet, followed by a sharp pull to straighten the sheet. Of course, this method is mainly used for major damage.

Ironing

Hammer ironing is still a basic method in many cases. The advantage is that it can repair the most severe damage, but almost always damage to the varnish occurs, so you need to invest in painting. The so-called spoon is placed on the underside of the surface and struck from above with a hammer.

Induction

A special device heats the deformed part and returns it to its initial state. Explaining the principle of induction itself would take too long, and we will not go into that story. Just know it will continue to bring the sheet metal to its original position by heating and cooling.

Do it yourself solutions

On the Internet, you can find various instructions for self-repairing for hail damage. Usually, it is a heating of the sheet with a hairdryer, followed by cooling with dry ice or liquid carbon dioxide. The effectiveness of this method depends on many factors, and there is the potential to do even more damage. If you are planning to do it yourself, first be familiar with the procedure. Of course, it’s best to have a regular check for both your gutters and roof and not be in this position in the first place.